Omni Block
The perfect solution to cost-effectively improve the performance and aesthetics of your building envelope.
Omni Block: Next Gen CMU
- Higher Thermal Performance & Unparalleled R-Value.
8″ block = R-20.2 (U=0.049) rating
12″ block = R-29.9 (U=0.033) rating - Unprecedented sound and fire resistant characteristics
- All the colors and finishes you expect from Westbrook Block
Performance & Aesthetics
Excellent insulation & thermal performance
Omni Block allows space for insulation inserts in grouted/reinforced cells which amounts to 15% more insulation over traditional insulation insert or foam. The overlapping internal insulation inserts reduces thermal transmittance through the mortar joint an improvement over traditional pre-insulated units.
12″ Block Design
- 11 5/8″ x 7 5/8″ x 15 5/8″ standard concrete masonry unit (CMU)
- No direct cross webs
- Thermal path extended to 24″
- Offset and constricted cross webs and a middle lineal wall create cells
- Cells are individually filled with uniformly molded EPS insulation
- Small cells may be required to be filled with rebar and grout
- Four layers of thermal mass and three layers of insulation
8″ Block Design
- 7 5/8″ x 7 5/8″ x 15 5/8″ standard concrete masonry unit (CMU)
- No direct cross webs
- Thermal path extended to 14″
- Offset and constricted cross webs and a middle lineal wall create cells
- Cells are individually filled with uniformly molded Expanded Polystyrene insulation inserts
- Small cell may be required to be filled with rebar and grout
- 3 Layers of Thermal Mass and 2 Layers of Insulation
Insulation Inserts
- Uniformly molded expanded polystyrene
- R-4 per inch at 1 lb. density
- Recyclable
- Non-toxic
- CFC free
- No “out gassing”
- No formaldehyde
- Fluted for moisture migration
- Strategically notched so there is no interference with mortar when inserted into a block course
Lower construction costs
Omni Block lowers construction and maintenance costs. Construction with Omni Block costs approximately 15% LESS (see below) than standard concrete block, furred-out, insulated and sheetrocked, while the R-Value of is approximately 25% MORE than the CMU wall assembly.
The table below is from a national construction management firm. Note that in some regions the Omni Block individual block price may be higher than this illustration, but then too, the price of standard block would be higher as well.
In addition to costing less, the elimination of the furring and sheetrock provides additional livable square footage by eliminating the need for additional walls. The block does not mold, burn, dehydrate, or attract termites, lowering maintenance costs.
Lastly, your team will enjoy standard masonry practices for installation. We offer the convenience of half-height units available.
Please click here to view the complete Omni Block detail database.
Sizes
Omni Brick and 8” Jamb is available in left and right configurations. 12” Omni Jamb is universal.